Rainbow Custom Shop :Speaker Cabinets

-----------------------------------------------------------------------------

May be an image of text that says 'cutting out the side, face & back panels'

May be an image of text that says 'Setting up both side panels in the angle jig to cut identical 10 degree slants'

May be an image of text that says 'Like That!'

May be an image of text that says 'a quick test fit to make sure if follows the template'

May be an image of text that says 'Ready to glue up using some floating corner jigs'

May be an image of text that says 'Jed Clampit strikes again..'

May be an image of text that says 'Now to add floating dovetails done with our shop built jig'

May be an image of text that says 'floating dovetails use tapered splines to lock the panels together making a very strong joint'

May be an image of text that says 'Are you done yet ?'

May be an image of text that says '14 degree splines ready for gluing..'

May be an image of text that says 'BOSCH CANAO Sanding the nibs down flush with cabinet walls'

 May be an image of text that says 'rounding over the edges'

May be an image of text that says 'cutting the grooves for the vinyl piping'

May be an image of text that says 'opening up the groove below the vinyl to install the piping'

May be an image of text that says 'routing out the speaker cutouts'

 

May be an image of text that says 'almost done, stay tuned..'

=May be an image of text that says '用口 E The Black Art of "stuffing" the cab to fine tune the response'

=May be an image of text that says 'This cabinet design uses a very high quality pair of European drivers for some remarkable tone'

May be an image of text that says '0 Ready to rock out with your socks out...'

===================================================